
Uncapped frame, ~1000m distance thermals. Reap IR 1x - 3.5x White Hot. FLIR-RS32 with increased heat Hue distance.
ЁЁЁЁЁЁЁ!!!!!!! Please check DOWNLOAD tab and select version that’s suitable for you.!!!!!!!! ЁЁЁЁЁЁЁ
New thermals are experimental and are not plug &play, you do need to fuck around to find out.
REAP-IR
- Removed Black Hot - replaced with Default White Hot 3.5x zoom (variable zoom 1x - 3.5x, both in White Hot mode)
- Increased max view distance
- uncap frame
- removed lag and motion blur
FLIR-RS32
- Increased max view distance
- Increased heat hue max visible distance
- Increased min/max distance brightness
- uncap frame
- removed lag and motion blur
T12W
- Increased max view distance
- Replaced GameBoy Hue to FLIR - heat hue visible distance same as FLIR-RS32
- uncap frame
- kept some motion blur (0.2 vs 1.2 original)
https://youtu.be/wxjjb_CnnFk
https://youtu.be/o3MZAH6LzH4
https://youtu.be/YcSSHde8MRo
6.4K Downloads
.
!!!
**ONLY USE THIS IF YOU HAVE FOVfix.
REQUIRED - FOVfixes and variable zoom
Fov fix on server side is explicitly checking for modname, if its last in order it should grab serverItem._id from previous mods.
To make zeus and echo1 zoomable rename FOVfix folder - zzzFontaine-FOV-Fix
This a thermal mod for Pettan’s 13.5 content preview mod - REQUIRED-** 13.5 content preview - GEAR,ATTACHMENTS and AMMO ADDED! !!!
1. Download Pettan’s 13.5 and replace bundles, FOLLOW FOLDER STRUCTURE and replace.
**2. Download new FOVfix update DO NOT REPLACE WITH MY FILES COMPLETELY IGNORE INCLUDED FOVFIX FILES
What was modified/added:
New Zeus Thermal modes: White Hot, Black Hot, Fusion, Negative Fusion
Echo1 Thermal modes: FLIR, Black Hot, Fusion, FLIR Negative Hue**
https://www.youtube.com/watch?v=2TGOV21gJHI
https://www.youtube.com/watch?v=sbqDG-vY3WM
3.3K Downloads
THIS IS A REAP-IR Black Hot update for FOVfix from Fontain.
Only use this if you are using latest FovFix - link Fontaine’s FOV Fix & Variable Optics FOVfix is basically required.
Changes:
ReapIR - Replaced zoom with Black Hot mode, FOVfix basically a solution for all your zooming needs from now on.
Black Hot does not suck anymore, you can now actually see the environment better.
White Hot does not suck anymore, you can now actually see the environment better.
~1000m Visible distance.
maybe known issues:
With FOVfix T12W may misbehave if you try to zoom in/out with it so dont try to zoom (FOV will snap to higher value and you will have -10 zoom idk).
Must delete previous Thermals and maybe scopes, FOV values are “remembered” from previous state.
You can modify ZOOM in FOVfix mods\Fontaine-FOV-Fix\db\ScopeTemplates.json - link Fontaine’s FOV Fix & Variable Optics
1.5K Downloads
Made it similar to FLIR per request. - FYI in camera draw distance does not affect FPS much (like 2%) but because camera is always on you will notice FPS drops with it equipped ~ 5fps.
FLIR, REAP-IR same as 1.0.2
198 Downloads
Updated REAP-IR specular contrast and tint, you can now better tell objects apart and image clarity sharper.
minor tweaks to FLIR
449 Downloads
Ran out of map to test distance.
No distance fall off.
Details
-
GUID
Not Available
-
License
Hey yo fellas Im installing new version of SPT and planning on fixing this mod and release 2 versions -
FOVfixes and default without fov fixes. Expect first weeks of December
latest FOV FIX might have some issues with low fps using red dots and iron sights, you can try using previous version of FOV fix but then you’ll have some issues with sensitivity, to fix that use gregs uniform aim.
In general mod has bugs, if you are willing to go around them download 1.0.4 if not well wait until its all fixed and use 1.0.3 instead.
Also FYI I have nothing to do with FOVfix I just adjusted thermal image to be used with it.
**seems like latest FOVfix fixed the sensitivity + low fps with red dots you can now update and there should be no major issues
https://streamable.com/pmem78**
Still around?
Still works on 3.8 (based on my fix for 3.7):
For the ones wanting to use this on 3.7.x -
- Move the content of the 1.0.7 file into the 1.0.4 file (won’t break without FOV fix, but you won’t see correct zoom stats and plays clunky without as you can’t switch modes independently of zoom)
- adjust your bundle.json to look like this:
{
“manifest”: [
{
“key”: “assets/content/items/mods/scopes/scope_all_flir_rs32_225_9x_35_60hz.bundle”,
“dependencyKeys”: []
},
{
“key”: “assets/content/items/mods/scopes/scope_base_trijicon_reap-ir.bundle”,
“dependencyKeys”: []
},
{
“key”: “assets/content/items/mods/scopes/scope_all_torrey_pines_logic_t12_w_30hz.bundle”,
“dependencyKeys”: []
},
{
“key”: “assets/content/items/mods/scopes/scope_all_sig_sauer_echo1_thermal_reflex_sight_1_2x_30hz.bundle”,
“dependencyKeys”: []
},
{
“key”: “assets/content/items/mods/scopes/scope_base_armasight_zeus_pro_640_2_16x50_30hz.bundle”,
“dependencyKeys”: []
}
]
}
in package.json, set “akiVersion”: “3.7.x”, - this will remove the warnings about the version.
You may need to clear temp files to see the change, not sure tbh as i always do this - after launching spt launcher, go to settings -> clean temp files -> then launch game
Thanks Traveler for making this mod!
For 3.8, on top of the 3.7 fix above, open the package.json and
- set “akiVersion”: to “3.8.x”
-add “isBundleMod”: true
It should look like this:
{
“name”: “Thermal-bundle”,
“author”: “Traveler”,
“license”: “Attribution-ShareAlike 4.0 International”,
“main”: “package.js”,
“version”: “1.0.0”,
“akiVersion”: “3.8.x”,
“isBundleMod”: true,
“devdependencies”: {}
} If author or someone could pin this until the mod is officially updated, that would be awesome
PLS UPDATE TO 3.7.6
This mod is really great! Why is your HK416 gun sound and accessories different from mine? Can you tell me what mod you used
This is a really great mod, when will be updated??
For the ones wanting to use this on 3.7.x -
- Move the content of the 1.0.7 file into the 1.0.4 file (won’t break without FOV fix, but you won’t see correct zoom stats and plays clunky without as you can’t switch modes independently of zoom)
- adjust your bundle.json to look like this:
{
“manifest”: [
{
“key”: “assets/content/items/mods/scopes/scope_all_flir_rs32_225_9x_35_60hz.bundle”,
“dependencyKeys”: []
},
{
“key”: “assets/content/items/mods/scopes/scope_base_trijicon_reap-ir.bundle”,
“dependencyKeys”: []
},
{
“key”: “assets/content/items/mods/scopes/scope_all_torrey_pines_logic_t12_w_30hz.bundle”,
“dependencyKeys”: []
},
{
“key”: “assets/content/items/mods/scopes/scope_all_sig_sauer_echo1_thermal_reflex_sight_1_2x_30hz.bundle”,
“dependencyKeys”: []
},
{
“key”: “assets/content/items/mods/scopes/scope_base_armasight_zeus_pro_640_2_16x50_30hz.bundle”,
“dependencyKeys”: []
}
]
}
in package.json, set “akiVersion”: “3.7.x”, - this will remove the warnings about the version.
You may need to clear temp files to see the change, not sure tbh as i always do this - after launching spt launcher, go to settings -> clean temp files -> then launch game
Thanks Traveler for making this mod!
fingers crossed you’re coming back soon!
Consider having a look at the T-7 goggles for your next version? They feel so bad next to your fixed sights.